In order to ensure the plastic injection
mould work normally,
smoothly, lower trouble and prolong the using life of machine, user must note
to maintain the mould during everyday use.
Sino has rich experience in how to maintain plastic injection mould,
since we are not only Chinese famous injection mould supplier, but also
injection molding company. We know every detail of mould and molding process so
had accumulated rich experience in maintenance plastic injection moulds. Below
are our common methods, for your reference:
After finishing mass production, we need to check the mould in a
complete inspection.
1. We should check and clean both parting surface, ensure that the
cleanness of the mould.
3. Clean venting-groove.
4. Cleansing cooling channel with PURE & sanitary Liquid, then
pulling away leftover by air gun & drying channel via SIROCCO.
While in the daily maintenance, we also need to check the whole
parts of the plastic injection molds, like the safety pin, safety screw, side
guard and so on.
1. Check and test cooling channel on airproof guard.
2. Measurement of heating system under H.R. Instruction.
3. Ensuring
Hydraulic C. moving under proper Conditions and w/o Oil-leak Problem.
4. Adding enough
Lubricant for smooth core pulling movements.
5. Make sure
lubrication of the sliding mold parts.
6. Measure hydraulic
system's pressurization.
Mould storage: after all techniques finished, physical dryness &antirust treatments
are required according. Finally, fixing & storing mould under dry
conditions.
Please keep in
mind if we keep maintain well of the molds, the mold will become the longer
life. If you are newer investor in plastic injection industry who is not
professional in such industry, please kindly contact us when you have any
problem, we are glad to reply you and help you with your business.
